Our products and services


If you face a problem concerning the measurement of substance parameters, you have found the right address! We develop specific solutions for contact free substance identification in various areas. Our experience so far reaches from the recycling branch to the food- , steel- and textile industry, up to medical applications. In close cooperation with our partners from the optical and technical branch we will find the optimal solution - from single systems to mass products.

Actual products and developments

Application fields: Steel, aluminium and automotive industry.


Our latest development in the area of icing measurement:

  • Ice sensor for windmills/rotor blades


Secure detection of ice formation on windmill blades! Prevention of unnecessary power production breaks. Real-time ice warning and on-time restart after de-icing.
  • - powerless measurement directly at the point of maximum ice forming danger - near the blade tip
  • - redundant system - surveillance of up to three blades
  • - maintenance free
  • - applicable in all cases where monitoring of ice formation on surfaces is important
    • Handgerät Online-Monitoring of Icing
For more information: please download our flyer

You may also visit our sales partner's web site:  Enertrag Windfeld Systemtechnik.

Research projects

  • Wind energy: flow measurement on rotorblade surfaces - Boost your energy production !

    • Large energy producing wind mills have a hub height of about 100 meters and blade lengths of up to 60 meters, hence the tip of the blades is moving between 40 and 160 m above ground. At such different heights the velocity of winds differs dramatically. Up to today the speed of wind is measured only at the height of the hub and the tilt angle of the blades is optimized for that "medium" speed. Adjusting the tilt to the actual speed of wind in every moment of revolution will definitively increase energy yields, but up to now no sensors are available to measure the speed of wind far out at the blades.
    This will change.
    Our company has just begun to develop a sensor that can measure the speed of air moving parallel to the surface of it's integration. It has a diameter of less than 1'' and does mount flush with the surface of the blade. All connections to the hub are done solely by optical glass fibres, hence elctrostatic and lightning problems are not relevant.

    We are looking for partners in the wind energy business for a cooperation to test this new sensor!

  • ice sensor for small wind turbines (SWT) Info (pdf)
    •  [in German]
  • sensor for salt reduction in winter road maintenance


We are interested in cooperation- and development partnerships in all fields of remote sensing, especially in icing measurement of road surfaces.

General services

We offer longtime experience in the area of contact free infrared sensing, especially in layer thickness measurement and substance identification. The range of our services is as follows:
  • Feasibility studies and prototype development
  • Modification of existing spectroscopical systems
  • Development of special systems
  • Low-cost serial applications
  • Spectra analysis and data mining
  • Development of chemometric models
  • Calibration service
  • Development support and consulting with our know-how
  • Brokerage of multi-company cooperations in the spectroscopical field

Your measurement task is unusual? You are already discouraged?

Whatever unusual your measurement problem might seem to be, contact us.
The development of completely new applications is our speciality!